721-.rar -

: You may need FTDI VCP drivers available from FTDI Chip to allow the OS to send commands via USB. 3. Software Configuration

model and choose "Direct USB" or "Direct COM" depending on your cable. 4. Running Your First Cut 721-.rar

Insert the blade into the blade holder (cartridge) and adjust the cap so only a tiny sliver of the blade (about half the thickness of a credit card) is visible. : You may need FTDI VCP drivers available

If you are using the USB connection, you must install the proper drivers to create a virtual COM port. 721-.rar

Place the holder into the carriage arm and tighten the locking knob.