: Press and hold the reset button with a toothpick, then plug the USB cable into the PC and the TV box's OTG port (usually the micro-USB or a specific USB-A port near the power input).
, this is often hidden inside the or is a small pinhole on the back.
The device must be in "Loader Mode" to be recognized by the flashing software: Launch on your computer. Click the "..." button at the top right to load your .img firmware file. Locate the Reset Button : On the
: A valid .img firmware file specifically for the 2. Connecting to PC (Recovery Mode)
: Press and hold the reset button with a toothpick, then plug the USB cable into the PC and the TV box's OTG port (usually the micro-USB or a specific USB-A port near the power input).
, this is often hidden inside the or is a small pinhole on the back.
The device must be in "Loader Mode" to be recognized by the flashing software: Launch on your computer. Click the "..." button at the top right to load your .img firmware file. Locate the Reset Button : On the
: A valid .img firmware file specifically for the 2. Connecting to PC (Recovery Mode)