You should hear the throttle motor move during those 10 seconds. 3. Idle Air Volume Learning (IAVL)
This step helps the ECM learn the voltage signal when the pedal is fully released. Engine off, ignition ON for at least 2 seconds. Action: Turn ignition OFF and wait at least 10 seconds.
5/6-speed Manual or CVT (Continuously Variable Transmission) Pure Drive variant reduced to 129g/km CO2 Common Issues Nissan Qashqai 2010 1.46 Adaptation
Fully release pedal within 3 seconds of the light staying ON. Start the engine and let it idle for 20+ seconds. 📋 Common Technical Specifications (2010 Model)
If you are performing maintenance on a 2010 Qashqai (J10), you must perform these "Learning" steps to ensure a stable idle and proper fuel management. 1. Accelerator Pedal Released Position Learning You should hear the throttle motor move during
Do this twice to ensure the ECM registers the released position. 2. Throttle Valve Closed Position Learning
Confirm pedal is released. Turn ignition ON (wait 3 seconds). Fully depress and release pedal 5 times within 5 seconds. Engine off, ignition ON for at least 2 seconds
Wait 7 seconds. Fully depress pedal for ~20 seconds until the stops blinking and stays ON.