P1074464_wt.7z Direct

: For extremely difficult geometry, copy the surfaces, apply the draft to those surfaces, trim them, and then "Solidify" them back into the main part.

: Often used for more complex geometry, this method allows you to use a specific edge or curve as the split point for the draft. This is highly recommended for parts with non-planar divisions. p1074464_wt.7z

To draft a feature using the file (which likely contains a CAD model for a casting or molded part), you should apply a Draft feature to the relevant faces. This feature creates a taper that allows the part to be extracted from its mold easily. : For extremely difficult geometry, copy the surfaces,

If the standard feature fails (which often happens on complex surfaces like fenders or casting pockets), consider these professional workarounds: To draft a feature using the file (which