Ppg244_s02_082.jpg

: You select a line (usually on the edge where the mold halves meet) that determines w

: You select a plane or face that remains stationary, and the draft is applied relative to it.

To draft a solid feature for a specific part or drawing (like ppg244_s02_082.jpg ), you typically use the tool found in the features toolbar of most CAD software such as SolidWorks or Solid Edge . This feature adds an angle to selected faces of a model, which is essential for parts intended for injection molding or casting to ensure they can be removed from the mold. Standard Workflow for Creating a Draft Feature ppg244_s02_082.jpg

: For circular or path-based features, you can often build the draft directly into the cross-section profile before revolving or sweeping the part.

Are you working in , Solid Edge , or another CAD program, and is there a specific error message appearing when you try to apply the draft? : You select a line (usually on the

: Create two different sketches at different heights (one slightly offset or scaled) and use a Loft to connect them, naturally creating a tapered wall.

: In some cases, it is easier to build the drafted faces as surfaces first and then knit them into a solid. Standard Workflow for Creating a Draft Feature :

: Input the required degree of taper (commonly 1∘1 raised to the composed with power 3∘3 raised to the composed with power for basic plastic parts).