: Connect the USB cable to a 5V/2A power adapter. Using a lower-wattage brick may cause the motor to stutter or the lights to flicker.
: Only use a dry microfiber cloth to wipe the lens. Liquid cleaners can seep into the housing and short the motor.
: Position the projector in the center of the room on a flat surface. Adjust the angle (usually 45–90 degrees) to cover the maximum ceiling area.
: Avoid running the projector for more than 4–6 hours continuously to prevent the laser diode from overheating.
: A "Mic" button on the remote allows the lights to pulse in sync with external music or clapping. Maintenance Tips
: Connect the USB cable to a 5V/2A power adapter. Using a lower-wattage brick may cause the motor to stutter or the lights to flicker.
: Only use a dry microfiber cloth to wipe the lens. Liquid cleaners can seep into the housing and short the motor.
: Position the projector in the center of the room on a flat surface. Adjust the angle (usually 45–90 degrees) to cover the maximum ceiling area.
: Avoid running the projector for more than 4–6 hours continuously to prevent the laser diode from overheating.
: A "Mic" button on the remote allows the lights to pulse in sync with external music or clapping. Maintenance Tips