Vhs_x_e_v_czarne_czy_czerwone_prod_majki_offici... ★ Safe

: Place the bottom half of the VHS shell on a flat surface. Insert the two spools (reels) into their designated circular slots.

: Align the top half of the shell with the bottom. It should click into place without resistance. If there is a gap, the tape or a plastic lever is likely misaligned. vhs_x_e_v_czarne_czy_czerwone_prod_majki_offici...

: This is the most critical step. Pull a slack length of tape and guide it through the "tape path" at the front of the cassette. It must go behind the two plastic guide posts and over the small rollers at each corner. Position the Springs and Locks : : Place the bottom half of the VHS shell on a flat surface

: Flip the cassette over and replace the five standard Phillips-head screws. It should click into place without resistance

: Make sure the front spring for the flip-up door is tensioned correctly so the door snaps shut.

: Use a flat-head screwdriver or your finger to manually turn one of the spools from the bottom to ensure the tape moves smoothly across the path without snagging.